 |
|
Cable Fault Route Locator |
|
Cable Fault Locator is a precision instrument, easy to use, which provides spontaneous display of the location of break in pair wires and cables. |
|
|
Cable Fault Locator
|
|
Item Code: VTC610
VTC 610 Cable Fault Locator can test long run of coaxial and twisted paircables in telecommunication applications. It utilizes high speed micro processor and sampling speed of 500 Mega Sample/sec for better resolution and display better wave shapes.The VOP for each cable depending on the cable dimension is set. A narrowelectric pulse of 30 nsec to 3 msec with a fast rise time is sent on the cable thatreflects back from the fault point/far end. The distance to the fault is thencomputed automatically and displayed in meters.
|
|
|
Intelligent Cable Fault Locator
|
|
Item Code: VTC620
VTC 620 Cable Fault Locator is a portable field instrument working on TDR and bridgemethods, adopting advanced micro-electronics technology. It is designed to locate accuratefault points in such cables as telecommunication leadsheathed cable, plastic cable oruser’s lead covered wire, while the faults include break, mix, earthing, defective insulation,or poor connecting. It is and ideal function-stable instrument for the field operator to improve work efficiency,
|
|
|
Intelligent Cable Fault Locator
|
|
Item Code: VTC880
VTC 880 Cable Fault Locator is a portable open-air instrument working on TDR and bridgemethods, adopting advanced micro-electronics technology. It is designed to locate accuratefault points in such cables as telecommunication plastic cable or user’s lead covered wire,while the faults include break, mix, earthing, defective insulation, or poor connecting. It isan ideal function-stable instrument for the open-air operator to improve work efficiency; inaddition, it can also be used for circuitry project checking electric property testing
|
|
|
XDSL Line Qualifer
|
|
Item Code: Kl20
The XDSL Line Qualifer KE-LQ20 is a hand held battery operated, multifunction measuring instrument, intended for pre-qualification, installation, fault location and maintenance of balanced copper pairs. For fault location DC-AC bridge, TDR and basic cable parameter measuring all in one unit.
To qualify a pair, end-to-end measurements with two instruments have to be made. This can be done by using two KE-LQ20 or one in conjunction with the Slave unit. Just one person, thanks to the communication between the two instruments, can perform such measurements. Operation is made extremely simple by means of pre-defined automatic test sequences.Tolerance masks of cable parameters as Loss, LCL, NEXT, FEXT, Impedance, Return Loss and the principal system parameters are pre-programmed for 38 different xDSL systems.
The operator can create new template sets with the Parameter editor facility of KE-LQ20 on the spot of the measurement. Template sets can be downloaded from PC as well.When the automatic test sequence is ready, KE-LQ20 provides an immediate Pass/Fail indication by comparing the test results with the tolerance masks and the required data rate with the calculated theoretically achievable rate. Detailed test results are available in graphic and numeric forms. In case of Fail indication the reason of failure is marked with asterisks.
|
|
|
Fault Locator TDR
|
|
Item Code: TDR20
The KE-TDR20 is purpose designed for balanced telecommunications cable. Seven test modes give fast fault location testing a single pair or comparing two pairs, one pair compared to any of the 10 memories, or crosstalk between two pairs. Fast function configuration. Dedicated keys for the most frequently used functions. All faults clearly identified from open circuits to wet joints.
Specifications
Measuring modes provided
- Examination of a single pair
- Comparison between a good and faulty pair.
- Difference between a good pair and a faulty pair - Location of crosstalk points by transmitting on one pair and receiving on the other
- 'Before and after' comparison using the memory Measuring ranges100m, 250 m, 500m, 1000m, 2500m, 5000m, 10000m, 20000 m (Maximum range depends on cable type and condition)
Evaluation of results with cursor and marker in metres
Zoom Selectable 1 to 5 Resolution
with zoom 0.11% of range without zoom 0.53% of range Accuracy
Sampling 0.1 m Fault location 0.4% of range
|
|
|
Featured Graphical TDR
|
|
Item Code: TDR
The KETDR 06 can locate the presence of cable faults, including shorts, opens, taps, splices, water ingress and other impedance anomalies, on copper communication cables up to a distance of 6000m (19,800ft). KETDR 06 has with the 3 nanoseconds pluse a “near End dead zone of 0. Suitable for all types of Communication Cable The KETDR 06 has selectable25, 50, 75 and 100 Ohm impedance ranges making it suitable for use on all types of metallic communication cable including Coaxial and Twisted Pair. Velocity of propagation is variable between 1% and 99%, in 1% increments.Auto Ranging Scale linked to Cursor Position the KETDR 06 has five measurement ranges, the most appropriate of which is automatically selected by the instrument dependent on the position of the cursor. This function reduces the time spent in the field locating the cable fault or anomaly.Built in Tone Generator (Oscillator)With a built in tone generator, injecting an oscillating signal between 810Hz and 1110Hz onto the cable under test, the operator can trace the cable and also identify pairs within a bundle, using KE310 tone probe Single Shot or Continuous Sampling Output PulseFor simple faults the KETDR 06 can be used in Single Shot mode where a test pulse is only transmitted each time a cursor key is pressed. This function conserves battery life.
For more elusive faults the test button can be held down, whereby the KETDR 06 will transmit 6.7 test pulses per second. This rate is 6.7 times that of most equivalent competitive products, and makes the KETDR 06 more likely to identify intermittent faults. The Cable can be continous be scanned or the trace can be held for furter analysis by the Scan Lock feature.Ultra-Bright 64 x 128 Electroluminescent LCDThe KETDR 06 features an ultra-bright 64 x 128 electroluminescent LCD ensuring that the instrument display is clearly visible under all lighting conditions and with adequate pixel resolution to ensure accurate fault location
|
|
|
Fault Locator Bridge
|
|
Item Code: FLB
The Fault Locator Bridge KE-FLB is a microprocessor controlled, DC and AC cable measuring
instrument intended for fast and accurate fault location and quality testing of telecommunication
cables.
The seven testmodi of KE-FLB alowing to locate precise all kind of faults like water ingress,
short, open resistance faults, split, insulation problems by the big display with backlight.
The KE-FLB is one of the smallest and lightweight cable qualifier on the market. The serial
interface allowes to download and upload the measurement data to a PC. By this interface it is
also possible to make a software upgrade if neccesarry
|
|
|
Pipeline And Cable Locator
|
Item Code: TT2000
The TT2000 Pipeline & Cable Locator consists of a Transmitter and a Receiver, used in the underground utilities route locating, the depth measuring and long distance tracing. We adopted multicoil electromagnetism technology on TT2200 Pipeline & Cable Locator, enhanced the pipeline localization to decide the depth precision and the goal pipeline recognition capability, also could accurately carry on tracing and the localization in the pipeline crowded complex region to the goal pipeline. Thus TT2000 Pipeline & Cable Locator is widely used in the telecommunication, electric, tap water, natural gas, physical prospecting, town planning and so on.. The TT2000 Pipeline & Cable Locator has many optional accessories, thus increased their use, and expanded their application scope.
|
|
|
Item Code: Pro700
The Pro-700 Underground Wire and Valve Locator is a new fault locator for irrigation contractors and maintenance personnel. Incorporating a powerful transmitter and sensitive receiver, the Pro-700 tracks irrigation wires, finds missing valves, and detects damage to vulnerable underground cabling. The Pro-700 transmits an easy to follow beeping signal that is tracked by the extra long receiver. Simply connect the transmitter to ground and the underground wire to be tracked and turn it on. Follow the beeps with the receiver using the visual meter, external speaker, or a headset. It is that simple.
The Pro700 Underground Wire and Valve Locator builds on the success of the original Pro600 model. In addition to a 27 inch receiver, external speaker, and “D” transmitter battery power, the Pro-700 adds advanced electronic circuitry to minimize 50-60hz AC noise for a clearer, cleaner sound. The Pro-700 also has enlarged analog meters for easy viewing of power levels on the transmitter and receiver.
|
|
|
Residential Wire And Valve Locator
|
|
Item Code: Pro300
Residential Wire and Valve Locator. In attention to maintain the quality of the products, we have installed a high- tech testing infrastructure with sophisticated testing equipment that proof-tests before supplying them to market. It is one of the standard equipment to locate the faults occurred in the residential wires and valves. We offer it at a lesser price.
|
|
|
Item Code: Pro290
The unique Pro290 Landscape Lighting Wire Locator is a new tool for contractors working with landscape lighting or invisible fences. The Pro290 consists of a transmitter and receiver and uses a limited power out put to match sensitive landscape lighting bulbs. The Pro290 uses an easy to track 33khz frequency, and sets up in less than a minute.
|
|
|
Cable route locator
|
|
Item Code: P410Master
Trace-locator P-410-MASTER was carefully designed to help with:
1) Trace searching, verifying the underground and open cable lines (open
transmission lines) and power cables; metal cords and pipelines (water-, oil- and
gas pipelines); supply pipelines that have metallic coat or metallic conductors;
2) continuous positional and directional checking, occurrence depth and current
flow in underground supply lines;
3) “maximum”- “minimum” search method;
4) guidance control for channel-identification of signal in line/pipe bottleneck or
cable bundles;
5) direct sound locating for orientating in complicated situations and trace-locating
of noisy wires;
6) controlling of received frequencies in wideband mode (spectrum);
7) trace-searching in wideband mode;
8) phase (contactless) method of tracing in copper wire coating and fiber optic links
(FOL);
9) tracing of cable interruption or cable core short circuits.
|
|
|
Cable (Pipe) Locator Athlete AG-318
|
|
Item Code: AG-318
| Receiver AP-017 - Numerous active frequencies from 200 Hz to 10 kHz as well as passive frequencies for current, radio and cathode corrosion protection signals - Line identification on “maximum” and “minimum” methods with indication of a deviation from an axis. - “Guidance Compass” for the easier recognition of the direction of the pipeline and for finding branches quickly - Depth and signal current intensity measurement at the push of a button - Can be switched over between automatic and manual amplification control - LED display - Battery for continuous operation within 50 hours - P54 protection class - Automatic recognition of accessories | | Generator (transmitter) AG-120 - Basic version with 3 fixed frequencies and the possibility of changes of the chosen frequencies with the step of 1 Hz in the range from 200 Hz up to 10 kHz. - Simultaneous transmission of up to 3 active frequencies. The optimum frequency is thus selected simply - on location - at the receiver. - Selectable inductive output for the frequency 8.928 kHz. - Automatic adjustment of the impedance in the range between 0.1 ohms and 1 kohms - Automatic recognition of accessories - LED display for the indication of the parameters – current, drag resistance, output power, voltage. - Analoq (graphic) indication of the signal level. - Operation via the integrated rechargeable battery. Extra functions: - function of output voltage limitation at safe level. |
|
|
|
Time Deflection Reflect Meter
|
|
Item Code: DS6130
Features • Handset • Easy to use • Max. range of 2000 meters • Measuring detector DS6130 TDR (Cable Fault Locator) is designed to locate any kind of RF(Telecommunication) cable faults like short circuits, open circuits or high resistance joints. TDR designed specifically for Telecom RF cables to identify DTF with high accuracy and reliability. What is the principle of TDR? TDR test port is used to transmit the electrical pulse energy from the cable fault like points where there are short circuits, open circuitsor high resistance joints. The pulse now travels with the certain speed specified for different cable type. So now DS6130 can judge the fault (Open/Short Circuit) automatically and show the distance of the fault. DS6130 handset adopts the Time Domain Reflection technology, displaying the time domain reflection picture on the LCD, using the analysis software to analyze the status of the cable. DS6130 can be used in testing cables of 25W, 50W, 75W and 100W impedance and more than 2km with high accuracy. DS6130 has powerful analysis functions, the double cursor can be defined as time marker to indicate distance, and distance test can be define as absolute scale and relative scale to be used in fault location. It can be defined as amplitude marker to indicate impedance characters. DS6130 handset is convenient and easy to use, has maximum range of 2000 meters. DS6130 comes with measure detector, carrying case, two 1.2V/1.2AH Ni. - MH Batteries, charger, user manual and quality card. DS6130 also provides you electronics map relevant to time domain picture, so that the fault can be detected easily. DS6130 can be connected to the PCs to upload files and make data analysis. DS6130 is widely used in testing cable under the ground, find out the impedance break point in HFC system such as cable damage, tie-in dampness, terminal impedance failure, so the product is useful in control the noise interference. DS6130 has “Self-study” function: After the calibration and test to a kind of cable of a certain length, it can make accurate test to that kind of cable later. Extra features offered by DS6130 Measurable object: 25,50,75 and 100 Ohm Co-axial Cables. Range of measurement: 15m ~ 2000m. Accuracy:±1m ± 1% Resolution: 1m.
|
|
|
Cable Tracer
|
|
Item Code: 180CB
AMPLIFIER PROBE (180 CB-A) The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation Works with any Tone Generator to identify wires Volume control for increased sensitivity and adjustable to suit work enviornment Recessed ON/OFF button prevents battery drain Power supply is from any 9V battery with a life of approximately 100 hours A plug receptacle is designed for head set or hand set AMPLIFIER PROBE (180 CB-G) Tone Generator is a great tool for locating and identifying cable pairs or individual conductors Besides providing tone generator, tone generator serves as a continuity and polarity tester Test results are displayed by a three-colored led Meets IEC/EN 61010-1, IEC/EN 61019-031, EN61326-1, EN55011, EN61000-4-2, EN61000-4-3
|
|
|
Cable Tracer
|
|
Item Code: 181CB
AMPLIFIER PROBE (181 CB-A) The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation Works with any Tone Generator to identify wires Volume control for increased sensitivity and adjustable to suit work enviornment Recessed ON/OFF button prevents battery drain Power supply is from any 9V battery with a life of approximately 100 hours A plug receptacle is designed for head set or hand set AMPLIFIER PROBE (181 CB-G) Tone Generator is a great tool for locating and identifying cable pairs or individual conductors Besides providing tone generator, the tone generator serves as a continuity and polarity tester A tone selector switch located inside the unit for selection of the fast tone or slow tone Two bi-colored LED for Line1 and Line 2 indication of the polarities of the telephone lines The unit has alligator-type terminals and a modular cable of 4 conductors with a strong connector The tone and continuity functions are only applied to Line 1 (modular connector)
|
|
|
