Telecom Test Equipment

• Supports hybrid user interface (UI) with graphical color touch-screen and also keypad at the same time, user-friendly.
• Supports multi-physical ports such as 1 fiber 10GE XFP(SX/LX) on one platform.
• Supports multi-stream traffic generation and analysis including layer 1/2/3/4 packets and fully customized packets with BERT.
• Powerful built-in Packet capture analysis functions with all packets and filtered option on dual ports or one port.
• Supports statistics measurement such as utilization, VLAN, control frame and packets, uni/multi/broadcasts, under 64 Byte frame, Jumbo frame and etc.
• Supports filtering measurement such as Round Trip Delay, Jitter, Packet Arrival Interval (PAI), Checksum error, Duplication error.
• Supports in-depth powerful dual ports monitoring like tap and VLAN scan.
• Supports Packet Flooding including MAC/VLAN/IP/Payload.
• Ethernet and IP advanced connectivity testing such as ARP, Ping, Trace Route, DHCP, and DNS.
• Supports optical diagnostics. It utilizes optical analyze to detect and identify optical faults, measure optical power
• Precise loopback testing at layer 2 (MAC) and layer 3 (IP).
• Powerful Ethernet network troubleshooting tool kit and performance measurement tool kit.
• Be able to upload and download a new software version and test results via FTP.
• File Manager: Be able to copy testing results, log files, screen capture files, and configuration files to USB memory card.

Fiber type single mode
Optical connector FC / PC
Wavelength, nm :
1310±20 / 1550±20 Visa USB
1310±20 ………… Visa 1310 USB
1550±20 ………… Visa 1550 USB

VTC100P is PON power meter For FTTH maintenance and Pass through test Testing frequencies are 1310/1490/1550 at the same time threshold set and alarm detection also.

Fiber optic light source is a fiber optic test equipment to measure the fiber optic loss for both single mode fiber cable and multimode fiber cables; usually the fiber optic light source is used with the fiber optic power meters. This fiber optical light source can provide wavelength output according to the specific requirements including the 650nm red source, 1310nm/1550nm wavelength for the single mode fiber and 850nm/1300nm wavelength for the multimode fiber. Used together with our fiber optic power meter, they act as an economic and efficient solution for the fiber optic network works
Main Characteristic

• Palm PDA or PC/Laptop Graphical User Interface
• Comprehensive DS1 Test BRICK (3"x9"x1" <2lbs)
• Single or Dual-Independent DS1 Test sets in 1 Package
• Monitor both CO and Station or Drop DS0 to Butt-set
• Complete Generic & 16-bit HDSL Loopback Codes
• Smart or Intelligent Line Repeater Codes
• Upgrade to other Services:
• DS3 Testing
• E1 Testing
• PRI-ISDN (Europe, Asia & North America)
• DS0-Voice, Signaling, 2-wire Signaling-TIMS
• Optional Remote Access & Control via:
• RS232 Serial Port (standard)
• 10/100 Ethernet and/or Wi-Fi port
• Remote Control via PC, Laptop or PDA

• Quick & Easy Qualification or Monitoring of Frame-Relay Circuits
• Integrated, Palm PDA or PC/Laptop Graphical User Interface (GUI)
• CSU/DSU Emulation including CSU, DSU and V.54 Loopbacks
• 56k Primary, Secondary and 64k Clear Channel Modes
• Switched-56k Mode supports both Station and CO Emulation
• THRU mode for non-Intrusive Testing
• Real-Time Monitor for Invalid BPV's and Control Codes
• Level Meter from +3 to -50dBm with 0.5dB accuracy
• Simultaneously test dropped DDS circuits from DS0 and 4-wire
• Can be integrated with DS3, DS1, DS0 and Signaling-TIMS
• Run Up to Six Independent Circuit Tests with One BRICK!
• Can use Wired, Wi-Fi or BlueTooth Communication options

ST220 telephone line tester is a new kind of line fault tester with safety & multi-functions capabilities. Besides the functions as a common Tel Line Tester, it also has the functions of high voltage protection and dangerous voltage warning, etc.

Main functions:

 Dialing, talk, hook

 Checking wire pairs
 Test insulation or break faults of the line
 Pulse/Tone switch

Key features:

DTMF applying to GB/T15279-94

High voltage alarm

Low voltage warning
Last number redial

Special durable test clamp
Automatic power off and energy-save design
Pocket size, simple operation

The TP290 test telephone is the solid, no-nonsense, economical approach to customers' premises and exchange testing. This robust and reliable equipment is ideal for use in all operating conditions, and was designed to meet the requirements of most international telephone operators.
High Harris quality standards demand that the TP290 test telephone be designed with the outside plant technician in mind. The rugged design makes this product ideal for telecom technicians and electrical contractors who need a tough, affordable test telephone with all the features they need to make their job as easy as possible.
Representing a wide range of features required in analog telephone test equipment, including a 10 number memory store, last number redial, high impedance monitor, line polarity indication.  The TP290 test telephone offers two modes of operation -monitor and TX -with built-in ringer for call indication. This product is the ideal answer for technicians and engineers who work in exchanges and at customers' premises.

We are treading in sierra wireless aircard World’s Fastest Speeds for Dual Carrier HSPA+ Networks.

Corporate road warriors who demand top-speed Internet access can get it from Sierra Wireless’s AirCard® 312U Modem, the first modem supporting speeds of up to 42 Mbps. It operates on Dual Carrier HSPA+ networks, the fastest carrier speeds to date, and is also backwards compatible with earlier HSPA technologies so you can work without interruption virtually anywhere you go. Connect your computer to check email, deliver web seminars, query ERP/ CRM applications, or video conference with your team.