Lan Tester Network Cable Tester

Fwt11 Network Ethernet Cable Tester Rj11 Rj45 Phone Lan Wire Tracker Line Detector Tracker,network Telephone Toner Tracking System &, Cat5 Cat6 Tracer Continuity Measuring InstrumentRJ11 RJ45 Cable Tester Multifunction Wire Tracker Check Measuring Instrument FWT11 Telephone Network LAN TV Electric Line FinderWire Tracker,..

• FWT11 High Quality RJ11 RJ45 Telephone Wire Tracker Tracer Toner Ethernet LAN Network Cable Tester Detector Line Finder Please Note: We have in stock all the time We send the package by Register Air mail,All packages have tracking number All products have 1 year guarantee >Product Description Main Functions Work profect when RJ11 RJ45 cable is on power l Wire tracing Trace RJ11, RJ45, cables or other metal wire (via adapter). Easy and fast to locate the breakpoint
• without opening the wires cover. l Network cable collation: Judge short-circuit, breaking circuit, open circuit and crossing. l Test line level, positive and negative polarity. l Status of telephone line checking: Test the working status of telephone line (idle, ringing, and off-hook) and judge TIP and RING line. l Check wire continuity. General technical parameters l Temperature Operating temperature: 0 C ~ 40 C, maximal 80% relative humidity (non-condensing) Storage
• emperature:-10~50C, maximal 80% relative humidity (non-condensing, battery not included) l Altitude:<2000m( meter) l Anti-explosion rating:IP 40 l Distance of emitting signal :300m or so l Battery Emitter: 6F
• Professional Wire Tracker. It can help you quickly find the target line in many pairs. It is suitable for tracking RJ45 internet cable, RJ11 telephone line and other metal wire in low electricity. Please note that it can not be used to track wires with high electricity ( maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V ). Besides, you may need two 9V laminated cells, which are NOT included in the packaging of this item.
• Network Cables Verifying. Plug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify whether the network cables are good or not. No need of network tester. Wire Tracking. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. It is recommended to stripe down some of the wires when

This instrument is a multifunctional handheld cable testing tool. Work perfect when RJ11 RJ45 cable is on power. It has a wide application with reinforced cable types and multiple functions. It is a necessary testing tool for telecommunication engineering, wiring engineering, and network maintenance person Main Features: Wire tracing Trace RJ11, RJ45, cables or other metal wire (via adapter). Easy and fast to locate the breakpoint without opening the cover of wire Network cable collation: judge short-circuits, breaking circuit, open circuit and crossing Test line level, positive and negative polarity Status of telephone line checking: test the working status of telephone line (idle, ringing, and off-hook) and judge TIP and RING line Check wire continuity General Technical Parameters Operating temperature: 0 - 40 degrees Celsius, maximal 80 percent relative humidity (non-condensing) Storage temperature: -10 - 50 degrees Celsius, maximal 80 percent relative humidity (non-condensing)

Altitude: less than 2000m Anti-explosion rating: IP40

Distance of emitting signal: 300m or so

Emitter battery: 6F22 / 9V (not included).

Receiver battery: 6F22 / 9V (not included)

Brand: BSIDE

Model: FWT11

Material: ABS Type: Measuring instruments

Primary functions: Wire Line Finder Tracker Scope of application: Education,Home appliance,Industrial,Market,Office,Supermarket Package weight: 0.276 kg

Product size: 20.00 x 4.00 x 3.00 cm / 7.87 x 1.57 x 1.18 inches

Package size: 22.50 x 12.20 x 4.70 cm / 8.86 x 4.8 x 1.85 inches

Package Contents: 1 x FWT11 Emitter, 1 x FWT11 Receiver, 1 x Clip Adapter Cable, 1 x RJ45 Adapter Cable, 1 x English Manual

• Item Code: 008

1. Three scan modes selectable: AC filter mode/ Analog mode/ PoE mode2. Detect AC voltage presence (50V-1000V).3. Test physical status for STP, UTP lan cable. 4. Measure cable length accurately , the range is 200m. 5. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch. 6. PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard)

1. Three scan modes selectable: AC filter mode/ Analog mode/ PoE mode2. Detect AC voltage presence (50V-1000V).3. Test physical status for STP, UTP lan cable. 4. Measure cable length accurately , the range is 200m. 5. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch. 6. PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard)

• Delivery Time: One week
• Packaging Details: box

• This instrument is a multi-functional handheld cable testing tool.
  It has wide application with reinforced cable types and multiple functions.
  A necessary testing tool for telecommunication engineering, wiring engineering and network maintenance person.
  
  Main Functions:
  Work prefect when RJ11 RJ45 cable is on power.
  Wire Tracing: Trace RJ11, RJ45, cables or other metal wire (via adapter).
  Easy and fast to locate the breakpoint without opening the wire’s cover.
  
  Network cable collation: Judge short-circuit, breaking circuit, open circuit and crossing.
  Test line level, positive and negative polarity.
  Status of telephone line checking: Test the working status of telephone line (idle, ringing, and off-hook) and judge TIP and RING line.
  Check wire continuity.
  
  Specification:
  - Operating temperature: 0°C ~ 40°C, maximal 80% relative humidity (non-condensing)
  - Storage temperature: -10~50°C, maximal 80% relative humidity (non-condensing)
  - Altitude: <2000m( meter)
  - Anti-explosion rating: IP 40
  - Distance of emitting signal: about 300m.
  - Emitter Battery: 6F22/9V
  - Receiver Battery: 6F22/9V
  
  Package Included:
  - 1 x FWT11 Emitter
  - 1 x FWT11 Receiver
  - 1 x Clip adapter cable
  - 1 x RJ45 adapter cable
  - 1 x English User Manual

• Delivery Time: 4 TO 5 Days
• Packaging Details: Package Included: - 1 x FWT11 Emitter - 1 x FWT11 Receiver - 1 x Clip adapter cable - 1 x RJ45 adapter cable - 1 x English User Manual

 LCD digital readout
• Leakage volume in dangerous zones will sound "beeping" and a red flashing lamp
• Design suitable for use in either hand
• Battery operates for more than 1 year
• Never needs recalibration
• Highly sensitive
• Excellent reliability and high precision

• Delivery Time: 5 to 6 days

1. Three scan modes selectable: AC filter mode/ Analog mode/ PoE mode2. Detect AC voltage presence (50V-1000V).3. Test physical status for STP, UTP lan cable. 4. Measure cable length accurately , the range is 200m. 5. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch. 6. PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard)